SHS42G-FB

  • SHS42G-FB

    SHS42G-FB

    Spring loaded sensor bracket with bellow suction cup, for utmost sensor contact on inclined or ondulated sheet stacks. Bellow suction cup (red), Hardness 45 shore

    Diameter of suction cup: 105 mm

  • SHS42G-FB_GE

    SHS42G-FB_GE

    Spring loaded sensor bracket with bellow suction cup, for utmost sensor contact on inclined or ondulated sheet stacks. Bellow suction cup (yellow), Hardness 55 shore

    Diameter of suction cup: 105 mm

Spring loaded sensor bracket with bellow suction cup, for utmost sensor contact on inclined or ondulated sheet stacks.

For vertical destacker:

+

For robot loader and high speed linear destackers:

0

For inclined sheet stacks:

+

For Tailor Welded Blanks + TWB

+

 

(Legend: "- -" = absolutely not suited / "-" = not suited / "o" = applicable / "+" = well suited / "++" = best suited)

Suitable sensors: P42GS, P42AGS, PW42GS, PW42AGS
Diameter of suction cup: 105mm
Spring travel: approx. 34mm, plus approx. 20mm compression travel
Total height (unloaded): approx. 128mm
Weight: approx. 1.2kg (2.64lbs) /
approx. 0.75kg (1.87lbs) (SHS42G-FB80)
Mounting: Hole 20.5mm for SHK clamping device
Pressure force at 1/2 spring travel: approx. 60N
Sensor mounting: Thread M42 x 1.5
 Vacuum feed: Hose 8mm OD
 Suction delay time:* approx. 0.5s

 

* is heavily dependent on vacuum strength, piping resistance, contact angle and contact pressure to the sheet. Sensor brackets are not suited for lifting. (except sheet is smaller than area of 3 suction cups)

  • SHS42G-FB_GE (yellow)
    Bellow suction cup, hardness 55 shore

 

 

To top